Search Results for:
Table No 13280 was manufactured during 2015 and has had one owner since. Due to a change in circumstances, the table has become available for a new home. The Commonwealth model billiard Table has been a popular model among Table owners since 1901. The model features a well-proportioned, turned tapered leg with Canterbury flutes. Table No […]
Read MoreCharlton Model 8ft Billiard Table No 11197 was made during 2002. Table No 11197 has become available for new owners, reluctantly, due to the current owners downsizing. Note: The photograph shows a Charlton Model Table, but not Table #11197.Table No 11197 is in Walnut colour and at installation will be fitted with: • New Strachan […]
Read MoreCommonwealth Model 9ft Billiard Table No 10855 was manufactured during 2000 and has had one owner since. With changing circumstances, the table is now ready for a new home. The Commonwealth model Table has been a popular model among Table owners since 1901. The model features a well-proportioned, turned tapered leg with Canterbury flutes. Note: the […]
Read MoreFederal Model 8ft Billiard Table No 11008 was originally manufactured in 2001. Since then, it has been in the hands of one particularly fastidious owner – the show timbers are in remarkably good condition. Note: the photograph shows a Federal Model Table, not Table #11008 Table No 11008 is in Light Walnut colour and will be supplied with: […]
Read MoreThe Earl of Hopetoun acted as Governor of the colony of Victoria from 1889 to 1895. His tenure was such a success, that, when the six colonies agreed to unite as a Federation, Hopetoun was invited to become the first Governor General of Australia in 1901. During the Earl’s tenure Alcocks received permission to name […]
Read MoreBarrel Leg model 10ft billiard table No 9526 was originally manufactured by Alcocks during the early 1990’s, and features superb selected hard maple with vivid swirling grain in the cushion rails. Note: The table pictured is a 10ft Barrel Leg model Table – it is not Table #9526 In 2024, ready for many more years of serious […]
Read MoreMERLIN CUE 3/4 JOINT Merlin Cue, made in England by Peradon, the world’s oldest cue maker. Length 147cm (58in) with brass ¾ joint Cue Shaft 117cm (46in) in North American Ash Cue Butt Genuine Ebony hand spliced. Butt decoration – Large composite front splice with Red Reptile Scale Effect Patterning 3/4 Joint Quick action-solid brass. […]
Read MoreBARRACUDA SILVER MEDAL 3/4 JOINT The Barracuda Silver Medal 3/4Joint Cue from the Barracuda Range. Stocked locally in our showroom in Melbourne. Length 145cm (57in) with brass middle joint Cue Shaft 104.5cm (41.25in) North American Ash Timber, machine spliced, Low friction finish. Cue Butt 40.5cm (16in) Plain Ebony butt. Ferrule Solid brass Leather tip 9 […]
Read MoreDUST COVERS Traditional style of dust cover, draping over the edge of the table by approximately 30 mm (12 in) is supplied without a fringe. There are several standard colours and a wide variety of other colours available.
Read MorePULSAR CUE 3/4 JOINT Pulsar Cue, made in England by Peradon, the world’s oldest cue maker. Length 145cm (57in) with brass ¾ joint Cue Shaft 104cm (41in) in North American Ash Cue Butt Rosewood, machine spliced. Butt decoration – Rosewood front splice with Plum veneer between two sycamore veneers. 3/4 Joint Quick action-solid brass. Butt […]
Read More